HZXVOGEN 4IN1 MIG MMA TIG Welder 200A Inverter Digital Welding Machine Helmet US

HZXVOGEN 4IN1 MIG MMA TIG Welder 200A Inverter Digital Welding Machine Helmet US. Adopting a fully digital control system to achieve precise control and stable arc length during welding, control the wire feeding speed, and achieve accurate and stable wire feeding.

Gas-shielded arc welding, MMA welding and self-shielded arc welding are available for selection. High duty cycle, long time welding. Closed loop feedback control, constant voltage output, mains voltage fluctuation is within -15%. The welding voltage and circuit are adjustable, and the IGBT technology reflects the reliability of the welding machine.

5 Gas shielded arc welding adopts unique dynamic characteristics control circuit, stable arc, small spatter, good shape and high welding efficiency. Eliminate molten balls, high no-load, slow wire feeding, and improve the success rate of arc starting. The inverter frequency is 35KHz, which greatly reduces the volume and weight of the welding machine. The metal loss is greatly reduced, and the welding efficiency and energy saving effect are obviously improved.

The generally required welding current is as follows:2.5: 70-100;-3.2: 110-160A;-4.0: 170-220A; 5.0: 230-280A. Input supply voltage (V): AC220V - 15%, 50 / 60Hz.

Rated input current (A): 32. Rated power capacity (KVA): 7.1. Recommended fuse capacity (A): 50.

Current setting range (A) :(MMA welding) 20 200. Current setting range (A) :(Gas shielded arc welding) 20 200. Volta Adjustment Range (V): 11 26. Feed speed adjustment range (m / min): 1.5 16. Welding Wire Diameter (mm): 0.6 / 0.8 / 1.0.

Size (cm): 49.5cm 28.2 cm 36.5cm (19.48in11.1in14.37in). 1pcs 110V 220V Cable adapter. 1pcs Graphite wire feed tube. Better Clarity, Real Color View. Now you can make a good view even better.

The large viewing area with (DIN5, non auto-darkening) SIDE VIEW gives you a full range of vision in relation to the welding area, which enhances operator control. Shade Control setting button, when in "WELD" mode, press the corresponding position, the digital number will change from 913 circularly.

When in "CUT" mode, press the corresponding position, the digital number will change from 59 circularly. When in "GRIND" mode, the digital number is 4, the number will not change when you press it. Headgear with oversized comfort cushion provides extensive adjustability, settings, and improved support for better fit and comfort.

The passive UV/IR filter works continuously and independently, providing consistent performance with or without power. Function: Weld (arc, tig and mig), Cut, Grind Filter Size:52.36"X44.88"X4" Active Viewing Area: 3.94"x3.66 Light Shade: DIN4 Dark Shade: DIN5~DIN9/ DIN9~DIN13 Way to shift Dark State: settings Switching Time: =1/10000S Sensitivity Adjustment: settings Delay Time: 0.1S~1.0S Power supply: CR2450 Lithium battery & Solar supply Rated Capacity of Lithium Battery: 600mAh Replaceable Lithium Battery: YES Operating Temperature: -5? Sensors to Weld Arc: 4 Protect Grade against UVB: DIN16 Low battery: YES Test: NO.

SEN:Sensitivity setting button, press the corresponding position, the digital number will change from 16 circularly. DELAY:Delay time setting button, press the corresponding position, the digital number will change from 110 circularly, the delay time will increase according to 0.1s. SHADE:Shade Control setting button, when in "WELD" mode, press the corresponding position, the digital number will change from 913 circularly.

MODE:Mode button, when you press it, the function will change between "WELD", "CUT" and "GRIND". Dark shade: The table below is the darkness color number comparison table.

Please select correct darkness color number based on the actual working conditions so as to reach the optimal protection and work efficiency. The mig function can weld aluminum, The lift tig can't weld aluminum. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "hvogen" and is located in this country: US.

This item can be shipped to United States.

Features: Gas ,Gasless
Brand: HZXVOGEN
Model: MIG250-DP
Country/Region of Manufacture: China
Input voltage(V): AC 220V±15%，50/60Hz
Rated input current (A): 32
Rated power capacity(KVA): 7.1
Recommended fuse capacity(A): 50
Current adjustment range (A) (MMA welding): 20-200A
Current adjustment range (A) (Gas shielded arc welding): 20-200A
Voltage adjustment range (V) (Gas shielded arc welding): 11～26
No-load voltage (V): 50
Feeding speed adjustment range (m/min): 1.5～16
Welding wire diameter (mm): 0.6/0.8/1.0
Rated duty cycle: 40%
Efficiency (%): 85
Power factor: 0.7
Protection class: IP21S
Insulation class: F
Welding Process: MIG
Item Type: MIG Welder
Voltage: 110V/220V
Welded Material: Stainless Steel
Note: Does not contain TIG Torch
Welder Size: 19.48*11.1*14.37in
Welder Weight: 7.8KG
Feed: Automatic Feed