Gas Torch Welding

110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches

110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches
110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches
110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches
110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches
110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches
110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches
110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches
110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches

110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches

110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches. It is using high temperature flame to make acrylic edge smooth and bright. Description: Synthetic glass (acrylic) polishing, Oxy - hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright.

The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright. HHO Flame Polisher H260 can be used easily, safely, cleanly and effectively with water and electricity as fuel. It is light, energy-saving, environmental friendly, safe and reliable. Take water (Distilled water and pure water) as fuel; "low working voltage, cut off automatically beyond the set voltage" design; H260 is updated from H100, it is economical type acrylic flame polishing machine; Its electrolysis adopts series and parallel compound technique.

Economical, environmental protection, fuel obtained easily; The design makes the machine safer and save more energy; APM-H260 is safe and reliable with low energy consumption; The electrolysis is more efficient. The potable 800W HHO gas flame generators are used for wide use to replace use of LPG or other gas for fuel. In jewelry industry, it is called water welding machine or hydrogen & oxygen melting / welding machine, while in organic glass industry, it is called fire-Polishing Machine. For welding, it featured low cost, welding fact, safety and low energy consumption.

Heat treatment for metal parts. Weld the hinge of spectacles rim.

Seal the injection glass bottle, conforming to GMP industrial standards. Fuse the lead or tin alloy plate for storage battery.

Cut and fuse quartz or fine parts etc. Peel off FPC of computer, fuse LED chip and thermocouple. Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc. After polish, the work piece will be smooth and shiny. Strong and durable, light weight and portable.

Energy saving, environmental friendly, safe and reliable The edge polished by this machine is more smooth and shiny. Water Consumption (L / H). 0.45 L / H. The flame acrylic polishing machines instruction: Flame gun instruction: 1. Bend flame nozzle (option); 5. Pin type flame nozzle (option). Add water timely After several hours of operation, the water level may fall below the middle line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water.

Switch off the power and open the valve on the torch to let out the remaining gas. Screw off the top cover. Add water close to the high line. Screw on the cover and switch on the machine, and it can work again. Attention: KOH or NaOH is dangerous, please do not eat them.

The temperature is up to 2800 when burning, please put the flame polishing machine in the safe place. Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock. Warning: When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately. The above cover; please do not load metal pieces.

Please connect the ground wire. Forbid ignite while no air pressure Synthetic Glass Industry. The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article.

In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload. It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect. Lead and tin pole fusion accumulator. Provides a convenient and safe oxy-hydrogen flame. Wooden Box: There is total one carton box.

17.71" x 16.92" x 9.84 (450 x 430 x 250mm). Carton box with foam fixed. 21.25" x 20.86" x 11.81 (540 x 530 x 300mm). Electrolyte powder (NaOH or KOH) is forbidden by express company, so we could not put it into the package. One bottle is 500g, and it can be used about 3-4 months.

The item "110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches" is in sale since Friday, September 08, 2017. This item is in the category "Business & Industrial\Manufacturing & Metalworking\Welding & Soldering\Welding\Welders, Cutters & Torches\TIG Welders".

The seller is "signagemaker" and is located in Beijing. This item can be shipped worldwide.

  • Brand: Ving
  • Model: H260 95L Polisher
  • MPN: 0292001963900
  • Country/Region of Manufacture: China
  • Type: H260 Polishing Machine
  • Power Source: Unknow
  • Item Code: APM-H160
  • Rated Output Gas: 150L / H
  • Flame Gun No.: Double
  • ID: APM-H260-110V
  • Bundle Listing: Yes


110V 800W Portable HHO Flame Generator Acrylic Polishing Machine + 2 Gas Torches